TIPS, USEFUL TECHNICAL INFORMATION
Dear Visitor!
Our aim is on this page to provide you useful technical information, installation ideas, which you can be interested in, or which problems we know that several customers had to face in the past.
We hope that can be at your assistance. If you want to have more information about one of our products or our technical solution, please contact us and we will do our best to reply you as soon as possible.
How to install Nicoll drainage systems?
;)
Our installation sketches give you useful help to build in Nicoll plastic gutter bodies. You can find here useful help for bulding-in our plastic gutter bodies. You can click on any of the listed links and can download drawings of the relevant product range. And the information films show you the procedure of installation step by step
Infrared-controlled tap is continuously flowing, doesn't close?
)
Sensitivity is too big (long), you should adjust it! It’s very easy, you need only a screwdriver and a piece of isolated cable, 15-20 cm long, rigid, bare at the two ends of it.
IMPORTANT: During adjustment electronics should be under voltage! (24V AC)
After you REGISTERED and received user’s code you can look at the procedure of adjustement of sensitivity in the GALLERY.
Show page gallery »When and how should you adjust sensitivity of our infra-red controlled pissoir flushes?
)
a./ Sensitivity of the single pissoir flush is too big (long perceiving) and the opposite wall is too near, the sensor is continuously perceving it, or sensitivity is too small, so it „can’t see” the user standing in front of it. b./ The group-pissoir flush is continuously flushing.
IMPORTANT: During adjustment electronics should be under voltage! (24V AC)
After you REGISTERED and received user’s code you can look at the procedure of adjustement of sensitivity in the GALLERY.
Show page gallery »Why is it worth using of electric handdryers? Facts and arguments
)
Please read some arguments for appliaction of electric handdryers instead of traditional textile and paper towels.
After you have registered and with the provided users code logged in, you can look at the PDF format description and the IPI (Esslingen) issued results of economical examination.
Infrared controlled handdryers and Pushbutton operated handdryres, distributed by B&K Ltd.
Click here for more information 
The new time-controlled pushbutton toilet flush doesn't close/rinse adequately?
Please check the direction-right installation of the shower taps, pissoir flushes and knee- and foot operated taps, because very likely it has been done in the reversed way.
In case of built-in pushbuttons unfortunately a chisel must be used as a help.
After assembling toilet flushes or emergency showers please push the flushing button one time (pull the chain).
We have got an other tip as well in case of toilet flushes.
The built-in thermostatic mixer doesn't provide constant temperature water?
Some questions of the occuring thousand ones, which may help:
-Has the right size mixer been built in?
-Is there a check valve in the input cold and hot line?
-Is temperature of hot water approx. constant?
-Doesnt dynamic press of cold and hot water show extreme changes?
-Has recirculation been built in or stagnant water should be let out?
-Has recirculation
been built in the right way?
